Sunday, April 3, 2016

Cleaning your AEM Dryflow Air Filter



Cleaning your AEM Dryflow Air Filter
  1. Remove air filter.
  2. Lightly tap off all loose dirt and debris.
  3. Spray K&N Air Filter Cleaner onto both sides of the filter.
  4.  Allow cleaner to soak in for 10 minutes. Do not allow it to dry on the air filter.
  5.  Rinse off the filer from the clean side out in order to flush the dirt out of the filter.
  6. If the filter is still dirty you may reapply the cleaner and rinse the filter again.
  7. After cleaning, gently shake off excess water and allow filter to dry naturally.






No comments:

Post a Comment